Skip to product information
  • Kleine Wolke Alfombra de baño Relax negro 70x120 cm

Kleine Wolke Bathroom Carpet Black 70x120 cm

160,72 €
160,72 € 180,89 €
You save 11% (20,17 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Do you hate getting out of the shower and stepping on the cold tiles of the bath floor? This comfortable and safe Kleine Wolke's bathroom carpet, Relax Model, is a perfect option. It measures 70 x 120 cm and is black. Relax bathroom carpet also provides safety. The bathroom carpet has a non -slip back to reduce the risk of slipping on the bare and humid floor. Relax's black bathroom has a solid color and is 100% made of polyacrylic. Polycrylic is a synthetic fiber, the threads remain warm and soft and resemble wool. Thanks to the material and a hair height of about 30 mm, the carpet is pleasant, soft and thick. It is a pleasure to step on it. This bathing mat can be washed in a washing machine in a delicate cycle at 40 ° C and dry in low temperature dryer. This bathroom carpet is also excellent to use in combination with radiant soils.

  • Color: black
  • Material: Polycrylic
  • Dimensions: 120 x 70 x 3 cm (length x width x high)
  • Hair height: 30 mm
  • Suitable for radiant soil heating
  • Non -slip
  • Soft and warm
  • Subtly mottled
  • Washable in the washing machine at 40 ° C
  • In low temperature dryer

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.