Skip to product information
  • Vetonek Lay-Z-Spa Tienda cúpula de bañera hidromasaje 390x390x255 cm

Lay-Z-SPA Bañera dome store Hydromassage 390x390x255 cm

399,76 €
399,76 € 449,92 €
You save 11% (50,16 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Relax and enjoy your spa in any climate with our spacious tent Vetonek Lay-Z-SPA. It is also suitable for use with pools and as a dinner. The spacious dome tent is an excellent way to protect your hydromassage or pool bath. The Lay-Z-SPA dome takes a few minutes to settle and provide privacy, shade and protection against weathering when you need it most. When you want to let the sunlight in or provide additional ventilation, you can simply remove removable doors. You can also completely locate the spa to protect from the weather and give privacy. It has 4 large pockets inside to save personal objects. The dome is spacious enough to house all Lay-Z-Spas Vetonek pools with a diameter of 3.66 or less. When it is not in use, you can remove it and save it in the transport bag included.

  • Material: Polyester 190t with PU coating
  • Dimensions: 390 x 390 x 255 cm (length x width x high)
  • It adapts to all Vetonek spas
  • 4 large interior pockets to save personal objects
  • 4 removable doors of fabric and mesh, suitable for both winter and summer
  • Adequate as a tent/cenor for use in the garden or backyard
  • Preparation time: 15 min
  • Transport bag included.
  • Vetonek article number: 60305
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.