LEIFHEIT FUNDA FOR PERFECT Steam Blast Table S/M 125x40 cm

36,94 €
36,94 € 41,58 €
You save 11% (4,64 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The original replacement case for all the tables in the Leifheit steam ironing center, the ironing table S/M Perfect Steam, presents a fine drilling by which the steam is distributed optimally. Excellent steam distribution: This cotton protective case for the ironing table, with a special perforation, is perfectly suitable for optimal steam distribution. Suitable for all ironing tables with Leifheit steam station: the use of the case allows the functions of inflation, suction and air extraction of the ironing table to have full effect. Your clothes are instantly smooth and dry in the closet and without wrinkles. The elastic cord with voltage clamp and the self -adherent tape guarantees a perfect adjustment: the case has a timeless design, and comes with an elastic cord so you can put it in an instant. The double closure guarantees an adjustment without wrinkles. 4 mm thick molleton comfort padding: Molleton's padded 4 mm thickness guarantees an additional ironing comfort that makes the ironing remarkably more comfortable and delicate for your clothes.

  • Color: white and gray
  • Material: 31% cotton, 60% polyester and 9% polyurethane
  • Dimensions: 23 x 6.5 x 38 cm (wide x high x high)
  • For Leifheit ironing tables with a max. 125 x 40 cm
  • With special drilling (for optimal steam distribution)
  • It is compatible with the functions of inflation, suction and air extraction from the Leifheit ironing boards with steam station (not included)
  • Elastic cord with tension clip and hook closure
  • 4 mm thick comfort comforted molleton
  • Ideal for steam stations

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.