Lifexl rake for leaves 2 in 1 pp dark green 157 cm

30,70 €
30,70 € 34,56 €
You save 11% (3,86 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This slight rake for leaves 2 in 1 is a great tool to keep the garden clean and tidy. Multipurpose: The grass rake combines an artificial grass rake and a leave of leaves, all in one. Clean the leaves of the artificial grass outdoors and fit effortlessly under bushes, between flowers or in a garden. Telescopic stick: The artificial grass brush comes with a telescopic stick, with an adjustable length of 123 cm to 157 cm, to meet various work requirements. Durable materials: The artificial grass tool has a polypropylene brush head, nylon bristles and a steel stick with powder coating. The material of each piece provides solidity, durability and resistance to oxide, corrosion and abrasion, in order to guarantee lasting use. Practical design: Head and stick are quickly hooked with a pressure closure to offer maximum comfort. Easy to save: When it is not used, you can save the garden rake easily by just remove the head of the brush or shorten the stick. In addition, you can also hang to save space. Comfortable mango: The non -slip handle provides you with a firm grip and allows you to clean comfortably and efficiently.

  • Color: dark green, silver and black
  • PALO MATERIAL: Powdered coating steel
  • RASTRILLO HEAD MATERIAL: PP (polypropylene)
  • Surs material: nylon
  • Total (maximum) length: 157 cm
  • Total (minimum): 123 cm length
  • Rastrillo head dimensions: 45.5 x 16 cm (high x high)
  • Function 2 in 1: Artificial grass rake and leaf rake

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.