Lifexl Retractable manual awning with blue and white LEDs 450x300 cm

375,99 €
375,99 €
Tax included. Shipping calculated at checkout.

Description

Create a pleasant and fresh place in your patio and protect yourself with UVA rays with our manual retractable awning! This awning is ideal to shade the windows, on balconies, patios, coffee shops and terrace restaurants. With a solid aluminum structure with powdered coating, oxidation resistant and a light design, he holds a certain wind force. The folding awning fabric is made of high density polyester with PU coating, which is resistant to water and UV rays and does not fade. You can adjust the angle and height to meet your specific needs. You can open and close the awning gently with the long crank. In addition, LED solar lights are fixed on the arm and provides low consumption lighting at night. LED awning is easy to mount on the wall. The manual and the necessary material are included in the delivery.

  • Color: Blue and white fabric, gray structure
  • Material: Aluminum structure with powder coating + fabric
  • Total size: 450 x 300 cm (length x wide)
  • Repeals water and dirt
  • Fabric (100% polyester) with anti-UV treatment
  • Includes solar panel and LED strip
  • Easy to open and retract with the crank
  • Battery: 3 x 3.7 V (2200 mAh)
  • LED Output: 3 W
  • LED voltage: 12 V
  • LED temperature: KV3000
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.