Lifexlsillón Reclinable with Gray Artificial Leather Foot Massage

419,23 €
419,23 € 471,84 €
You save 11% (52,61 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Sit and rest in this very comfortable reclining armchair of lifting massage! Electric elevation function: This reclining armchair for older people is equipped with an electric motor for elevation function. Thanks to the lifting function that the armchair pushes up completely, you can easily get up, without back and knees, just by pressing the Manual Reclining Function: This reclining chair has a handle on the right side . Just pulling it, you can manually adjust the restraint and support for any position that is comfortable. This function allows a maximum inclination of 135 degrees. In addition, the support quickly returns to its original position just by pulling the handle. Vibration function: the 6 massage points will make you enjoy a better focused massage. In addition, the included command allows you to choose different massage programs. The massage function works through the USB connector that requires a USB USB power supply (not included). Warm, as if they were hugging you. Synthetic leather is a very durable and stain resistant material, so it is easy to clean with a damp cloth. In addition, the smooth surface gives it a luxurious appearance and the beauty of the authentic skin. Practical Side pocket: This armchair has a side pocket to save the remote control or keep your things available to hand. Solid and stable structure: The structure, made of wood and metal, provides strong structure and stability. This reclining armchair is comfortable and durable.

  • Gray
  • Material: Synthetic leather (60% polyurethane, 30% polyester, 10% cotton), plywood, metal
  • Filling material: foam, pp fiber
  • Sitting dimensions: 75 x 92.5 x 100 cm (wide x high x high)
  • Limited dimensions: 75 x 148 x 79.5 cm (wide x high x high)
  • Seat width: 50 cm
  • Deep of the seat: 57 cm
  • Seat height from the floor: 42-44 cm
  • Height of the headquarters from the ground: 58 cm
  • Options: heatless massage
  • Massage type: 6 -point vibration massage
  • Input voltage: 5 V CC
  • Input current: 2 A
  • With electric motor for automatic lifting function
  • Electric motor entrance: 24 V CC, 1.5 A
  • Electric motor output: 100-240 V ~, 50-60 Hz
  • Maximum load capacity: 110 kg
  • Requires assembly: Yes
Maximum 110 kg per seat. This device can be used by children from 8 years and people with reduced physical, sensory or mental abilities, or who lack experience and knowledge, provided they are supervised or have received instructions on the use of the device safely and Understand the dangers that it entails. Children should not play with the device. Cleaning and maintenance by the user should not be performed by children without supervision.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.