Skip to product information
  • Vetonek Sillón de tela gris claro

Light gray fabric armchair

102,27 €
102,27 € 115,11 €
You save 11% (12,84 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This magnificent armchair, with a modern and original design, will draw attention wherever it is put. Built with a lasting wood structure and legs with powder coating, this cube armchair is robust but comfortable and designed for years of use. This quality relaxation is supported by solid legs that provide additional stability. Thanks to the fixed reclining position and the ergonomic design, it offers you an optimal seat experience. This elegant armchair is also a good decoration for any home and workplace. It will undoubtedly contribute a concise but elegant taste to your home.

  • Color: light gray
  • Material: solid wood, plywood, powder coating steel
  • Dimensions: 53 x 69 x 73 cm (wide x high x high)
  • Seat width: 49 cm
  • Seat depth: 52 cm
  • Seat height from the floor: 38 cm
  • Height of the headquarters from the ground: 51 cm
  • Maximum load capacity: 110 kg
  • Material: Polyester: 100%
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.