Loom with solid wood cushion of dark gray acacia

190,11 €
190,11 € 213,97 €
You save 11% (23,86 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With our solid acacia wood lorage, you will always have a comfortable place to relax in the patio or in the garden. The unique wooden structure is cozy and emanates a natural charm. This lorage is made of high quality acacia wood, which is resistant to the weather and lasting. When water resistant, the chair is adequate for both interior and outdoor use. This loraked can be folded when it is not in use. This lorage will be the perfect companion in the sunny afternoons thanks to its ergonomic design. It is delivered with the comfortable thick padding cushion and a backup pillow for maximum comfort. The polyester case that barely needs maintenance can be removed and washed. The sunbed is easy to mount.

  • Color: dark gray
  • Material: solid acacia wood with a natural oil finish
  • Cushion case material: 100% polyester
  • Cushion thickness: 3 cm
  • Dimensions: 184 x 55 x 64 cm (length x width x high)
  • Dimensions (folding): 92 x 55 x 20 cm (length x width x high)
  • Washable cushion cover
  • Folding
  • Appropriate to use both inside and outside
  • The delivery also includes a seat cushion and a backup pillow
  • Material: Polyester: 100%
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.