Skip to product information
  • Madison Cojín para tumbona Basic gris 200x60 cm

Madison Cushion for Basic Gray Basic 200x60 cm

90,26 €
90,26 € 101,58 €
You save 11% (11,32 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Are you looking for a garden cushion for plastic, steel or wood loaf? The thick cushion for Madison Basic Basic gives a more comfortable and attractive appearance to your loup. Soft and smooth material: The cushion for garden sun loungers is made of 50 % cotton and 50 % polyester. This type of fabric provides the soft cotton touch and polyester resistance. Adjustable hebilla and practices Succession ropes: the exterior cushion is equipped with an adjustable buckle in the rear and fastening ropes to make sure the cushion does not move Fashionable designer: the garden seat cushion is designed with stitched buttons and a steering wheel to give it the final touch. Thus, Madison's cushion makes the garden more you! More info: the basic series is monocolor, with a good quality / price ratio. If you look carefully at the basic fabric, you can see that the fabric is made of several color tones that together make up one. Simple design can be used as a basis for creating modern combinations.

  • Gray
  • Material: fabric (50% cotton, 50% polyester)
  • Dimensions: 200 x 60 cm (length x wide)
  • Thickness: 7 cm
  • Sewed buttons and steering wheel design
  • Equipped with fastening ropes
  • Adjustable buckle
  • Dense fabric
  • UV resistant with solidity 4 of color, on an 8 scale
  • Easy to take care of
  • Suitable for outdoor use
Attention! -Stem the plastic bags out of the reach of babies and children.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.