Magnetic Wall Black White tempered glass 100x50 cm

43,30 €
43,30 € 48,73 €
You save 11% (5,43 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this wall magnetic board, special ads or daily information will appear in a simple and organized way. Fluid writing: The dry erase board gives you a fluid writing experience and handwriting is easy to clean with a draft. Durable temperate vidrio: the magnetic adverters is made of tempered safety glass, which does so durable. Multifunctional Pizarra: Use the magnetic slate mounted on the wall as a blank canvas to write down daily plans and task lists or a collective place to put your creative thoughts and ideas. Practical installation: The necessary wall assembly materials are included , which causes the magnetic board to be easy to connect to any wall in your home, office or school. We remember using powerful magnets (N35) to achieve the best effect. Note: Each product comes with a mounting manual in the box to facilitate the assembly. The screws and the tacos for the interior of the wall are not included. Search and use screws and tacos suitable for your walls. If you are not sure, seek professional advice. Read and follow every step of the instructions carefully. On glass magnetic boards, magnets can only reach part of all their strength potential through glass. Powerful magnets (imam type are needed, if available) to set objects to this type of board. The fridge magnets and magnetic tapes do not adhere to the magnetic glassboards of glass. Likewise, the POT magnets, Ferrita magnets and very heavy office magnets are not suitable for magnetic glass boards. We recognize using powerful magnets (N35) to achieve the best effect.

  • Color: White
  • Material: tempered glass, galvanized steel
  • Dimensions: 100 x 50 cm (high x high)
  • Thickness: 4 mm

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.