MALLA TUNNELES 3 UDS Fiberglass and PP 1.5x5 m

65,12 €
65,12 € 73,29 €
You save 11% (8,17 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These mesh tunnels provide the conducive environment for the rapid germination and growth of young plants, so it is ideal for vegetable covers, frosted and greenhouse protection covers. Durable and flexible: The network tunnel is made of fiberglass, so it is durable, corrosion resistant and also has good elasticity and tenacity. DIYD DIY: Each arch consists of three tubes without sleeves in the tunnel. These tubes can connect and bend to form arches according to your specific needs. In addition, the tube position can be customized, which allows you at both ends of the mesh to reach the ground. Second, cut the network as you want and place it on the arch. Third, hold the network with garden tweezers to avoid being affected by strong winds. Finally, anchor the garden network with fixed nails along the edge. Multiple uses: This mesh tunnel is versatile and suitable for most plant protection needs, protects against insects and effectively protects vegetables, plants and flowers .

  • Color: Black and Black
  • Tunnel material: fiberglass
  • Network material: PP (polypropylene)
  • Network dimensions: 1.5 x 5 m (width x long)
  • Maximum dimensions: 4 x 0.65 x 0.5 m (length x width x high)
  • Network mesh dimensions: 1 x 1 mm (width x long)
  • Dimensions of the plug: 2.8 x 15 cm (diameter x long)
  • Requires assembly: Yes
  • Delivery contains:
  • 3 x white networks
  • 15 x connection tubes
  • 30 x No connection tubes
  • 30 x clips
  • 6 x piquetas

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.