Skip to product information
  • Medisana Masajeador de cuello Shiatsu NM 885 gris

Medisana Shiatsu NM 885 Gray Neck Massage

112,78 €
112,78 € 126,94 €
You save 11% (14,16 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Shiatsu NM 885 neck massage of Medisana is designed to relieve muscle pain and fatigue providing you with a comfortable Shiatsu massage. It is also suitable for use on the shoulders, back, the upper and lower part of the legs and abdomen. An effective body massage will eliminate pain and reduce stress, while helping you relax. You can easily adjust the intensity of the massage with the 3 settings and pulling the clamping straps. The adjustments are easily handled by the integrated control element. In addition, this massage is equipped with a heating function that stimulates blood circulation. With the NM 885 model, which can be used wirelessly, you no longer need an extra pair! Not only is it ideal at home, but it can also be used during long trips, such as car or plane trips, where it is sitting in the same position for a long time. It can be used both with adapter and batteries. The removable case has a comfortable inner lining and is washable.

  • Gray
  • Material: Polyester
  • Dimensions: 40 x 18.5 x 21 cm (wide x high x)
  • Power: 19 w
  • Power supply: 220-240 V ~
  • Shiasu relaxing massage device for neck and shoulders
  • 3 massage intensity levels
  • With heat function
  • Ergonomic design
  • Battery level LED indicator
  • Integrated control element
  • Network or battery operation
  • Removable and washable neck cover
  • Necessary battery: 1x rechargeable lithium ion battery (included)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.