Skip to product information
  • Vetonek Mesa de centro de madera maciza 60x60x45 cm

Mesa de centro de madera maciza 60x60x45 cm

141,10 €
141,10 € 158,81 €
You save 11% (17,71 €)
Tax included. Shipping calculated at checkout.

Description

Esta exclusiva mesa de centro de madera, hecha de madera maciza con acabado miel, será un gran aporte para tu casa. También se puede utilizar como mesa de sofá, mesita auxiliar, y mesita de salón. El tablero sólido proporciona una superficie estable y segura en la que puede colocar bebidas, un frutero, un jarrón u otros artículos decorativos. Las cuatro patas fuertes aportan robustez. La mesa de centro está hecha a mano de madera maciza de acacia y tiene las características del palisandro. La fina artesanía y las hermosas vetas de la madera hacen que cada mueble sea único y ligeramente diferente del resto. Nota importante: Los colores varían de una pieza a otra, por lo que cada una de nuestras mesas de centro sea única. La entrega es aleatoria, lo que garantiza la exclusividad e individualidad del producto.

  • Color: Marrón
  • Material: Madera maciza de acacia con acabado miel, tratamiento de palisandro y palisandro
  • Dimensiones: 60 x 60 x 45 cm (largo x ancho x alto)
  • Tamaño de las patas: 7 x 7 cm (largo x ancho)
  • Fácil de montar

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.