Skip to product information
  • Vetonek Mochila estilo militar 50 L verde oliva

Military Style Backpack 50 L Olive Green

52,62 €
52,62 € 59,23 €
You save 11% (6,61 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our comfortable and practical military backpack is the ideal partner for travelers, but also for explorers, hunters, hikers and lovers of outdoor activities. Made of high quality coated fabric, this backpack is resistant to heartbreak, weathering and wear. The military -style backpack has two padded -adjustable padded straps, compression straps and an adjustable and removable belt with chest and for the waist. The backpack has a large capacity of 50 liters so that he can pack everything he needs for his outdoor adventures. The main main and secondary compartment can be used to store its large items and two front pockets with zipper that provide additional space to store the items that you need to have nearby, such as knives, glasses, lenses, lamps, etc. The backpack has a breathable mesh support for comfort.

  • Color: olive green
  • Material: covered oxford fabric
  • Dimensions: 30 x (15 + 10 + 8) x 50 cm (width x depth x height)
  • Capacity: 50 l
  • Drawing and outdoors
  • With 1 main compartment with inner pocket with zipper and mesh pocket
  • With 1 secondary compartment with zipper with mesh pocket
  • With 2 front pockets with zipper
  • With a superior transport handle
  • With compression straps
  • Padded and adjustable shoulder straps
  • Adjustable and extractable straps of chest and waist
  • Breathable mesh back
  • Material: Polyester: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.