Skip to product information
  • Vetonek Mueble de TV de madera maciza de acacia 120x30x40 cm

Mueble de TV de madera maciza de acacia 120x30x40 cm

270,02 €
270,02 € 303,90 €
You save 11% (33,88 €)
Tax included. Shipping calculated at checkout.

Description

Este mueble para la televisión de madera con exquisitos motivos tallados será un aporte atemporal para tu hogar. Este mueble está hecho de madera maciza de acacia a la que se le ha dado un acabado blanco para darle un aspecto hermoso y un color brillante. La artesanía y las bonitas vetas de la madera hacen que cada mueble sea único y ligeramente diferente al resto. Además, la artesanía perfecta garantiza que cada paso del proceso se lleve a cabo con el mayor cuidado, ya sea el pulido, la pintura o lacado. Los elegantes patrones tallados a mano en la superficie frontal del cajón suman belleza al mueble. Este mueble bajo cuenta con 4 cajones y 2 compartimentos, lo que proporciona un amplio espacio para mantener tus dispositivos multimedia, libros y otros artículos perfectamente organizados. Nota importante: Los colores y las vetas de la madera varían de una pieza a otra, por lo que cada una es única; la entrega es aleatoria.

  • Color: Blanco y gris
  • Material: Madera maciza de acacia, madera de ingeniería
  • Dimensiones: 120 x 30 x 40 cm (ancho x profundo x alto)
  • Pulida, pintada y lacada
  • Con bonitos patrones tallados a mano.
  • Con 2 compartimentos y 4 cajones

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.