Skip to product information
  • Noordwand Papel pintado Friends&Coffee Stones rosa

Noordwand Papead Papel Friends & Coffee Stones Rosa

39,06 €
39,06 € 43,96 €
You save 11% (4,90 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This pink wallpaper is part of the Friends & Coffee collection of Noordwand, which has a stone print with different colors, so your room will seem new. Easy to place: The non -woven wallpaper has a upper paper layer with a non -woven back, which allows the tail directly on the wall instead of the paper sheet of wallpaper. This facilitates the placement. Non -woven resistant: The material is strong, easy to apply and can be used perfectly on rough or new construction walls, and if necessary, it can be removed quickly and easily. Industrial stake: this lasting paper Non -woven painted, with stone print, add a lovely industrial style to the decoration of the house. Add the design inspired by the old factories and industrial spaces to your home. Washable wall panel: light dirt is removed with a slightly humid cloth or a soft sponge.

  • Color: pink
  • Material: non -woven fabric
  • Length: 10.05 m
  • Width: 53 cm
  • Advantages:
  • Strong
  • Good color solidity
  • It does not expand, so there are no visible unions
  • Does not shrink and is resistant to tears
  • Most equitable wall vision
  • Easy to apply without the use of a wallpaper
  • Easier to remove
  • Note:
  • The background must have a uniform color (it can be seen through non -woven paper)
  • General:
  • Pattern repetition: rectum consecutive (53 cm)
  • Easy to remove dry so the back wall will suffer less damage
  • Check the instructions for glue application on the label
  • Washable

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.