Skip to product information
  • Vetonek Oso decorativo de Navidad con 45 LEDs acrílico 71x20x38 cm

Christmas decorative bear with 45 LEDs Acrylico 71x20x38 cm

63,44 €
63,44 € 71,40 €
You save 11% (7,96 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our striking Christmas decoration illuminated in the form of bear is a perfect decoration! This decoration is made of weather -resistant acrylic material and is equipped with 45 cold -white LEDs, which save energy. This Christmas light is undoubtedly an excellent gift for your family and friends this next Christmas. Note: The USB included is not waterproof, so this part has to avoid water, but thanks to the 5 m cable the decoration can be used outside, since the cable and the product are waterproof. The product has a connector USB, but the 5 V certified USB supply source is not included.

  • Light color: cold white
  • Material: Acrylic
  • Dimensions: 71 x 20 x 38 cm (length x width x high)
  • Cable length: 5 m
  • LED number: 45
  • Voltage: DC 5 V
  • Power: 5 w
  • Includes a USB
  • Of low consumption
  • Outdoors
  • Suitable for use inside and exterior
  • LED chains are not replaceable
  • Required assembly: no
This device is not designed to be used by people (including children) with reduced physical, sensory or mental abilities, or with lack of experience and knowledge, unless they have received supervision or instructions on the use of the apparatus by a responsible person of your safety.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.