Skip to product information
  • Persiana Plisada 40X100cm Blanco

Pleada Persiana 40x100cm White

25,30 €
25,30 € 28,47 €
You save 11% (3,17 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This pleated blind is an ideal protection of sun and vision. It can be adjusted from the bottom and upper to meet their needs on different occasions and time. The modern folds, similar to the waves that accumulated by the breeze through the sea , which represents a simple but enormous vision of people, are also an excellent decoration of their room. The pleated curtain is mounted by means of titular clamping, without piercing the wall, window or door, excellent for use at home, room Being, bedroom, bathroom, kitchen, dining room, office building, meeting room, visits room, etc. 90 x 100, 100 x 100, 110 x 100 40 x 125, 50 x 125, 60 x 125, 70 x 125, 80 x 125, 90 x 125, 100 x 125, 110 x 125 40 x 150, 50 x 150, 60 x 150, 70 x 150, 80 x 150, 90 x 150, 100 x 150, 110 x 150 40 x 200, 50 x 200, 60 x 200, 70 x 200, 80 x 200, 90 x 200, 100 x 200 , 110 x 200usted can find one that adapts to your plan.

  • Material: Cresta fabric
  • Material of the upper and lower part of the bar: aluminum
  • Color: White
  • Width: 40 cm
  • Length: 100cm assembly by fixing support
  • Care: Brush and Lipiela Dry
  • Material: Polyester: 100%
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.