Skip to product information
  • Vetonek Somier de láminas sin colchón con 42 listones 7 zonas 80x200 cm

Plate somier without mattress with 42 slats 7 zones 80x200 cm

130,91 €
130,91 € 147,34 €
You save 11% (16,43 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our comfortable somier of sheets will make your bed even more! With a solid beech wood structure and birch slats, the somier is robust and durable. The 7 comfort zones provide optimal support for your body. The two ends of the sheets are subject to SBS rubber caps to improve the stability of the entire structure. Thanks to the 6 adjustable double sheets in the central area, the firmness of the Somier can adapt to your needs. The areas of the header and feet are adjustable for your comfort. The assembly is easy. Note: Delivery includes only one somier; The mattress or bed frame is not included. Note: Assembly is required due to shipping restrictions that limit the size of the package to a maximum of 120 cm.

  • Material: Massive Haya Wood Structure and Birch sheets
  • Dimensions: 195 x 80 x 10 cm (length x width x high)
  • Adequate mattress size: 80 x 200 cm (width x long) (mattress not included)
  • With 42 sheets (6 double sheets with adjustable firmness)
  • With tape reinforcing the central zone
  • With SBS rubber caps to hold the sheets
  • Adjustable in the head and feet area
  • Easy to ride

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.