Skip to product information
  • Vetonek Jaula para hámster polipropileno y metal roja 58x32x36 cm

Polypropylene and Red Metal Hamster Cage 58x32x36 cm

64,45 €
64,45 € 72,53 €
You save 11% (8,08 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This hamster cage offers a private and safe place for your pet to sleep and have fun! In addition, the included accessories will not let your pets get bored. Durade pp: polypropylene (PP) is a popular plastic that is also one of the most used materials in exterior furniture. It is light, hard and resistant to the impacts. Ventilated design: the rodent cage has a higher structure of wire that allows good ventilation to keep the air clean and fresh, which is good for the health of your pets. DESIGN OF VARIOUS Levels: The design of several levels allows a lot of space for your pet to move. The wooden ladder between each space allows your pets to move easily. All these accessories make the house for rodents the ideal place for your pet living and fun. Additional self -sureness: the double security of the house for rodents guarantees extra safety for your pets.

  • Base color: red
  • Material: PP (polypropylene), metal
  • Dimensions: 58 x 32 x 26 cm (length x width x high)
  • Running wheel diameter: 16 cm
  • Metal wire space: 13 mm
  • Delivery includes:
  • 1 x cage
  • 1 x running wheel
  • 1 x upper house
  • 1 x tray
  • 1 x staircase

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.