Skip to product information
  • Vetonek Lamas para suelo de PVC autoadhesivas estampado gris 4,46m² 3mm

PVC soil lames Self -adhesive gray print 4.46m² 3mm

98,83 €
98,83 € 111,23 €
You save 11% (12,40 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our self -adhesive soil set set of PVC, composed of 32 lames, each with a size of 91.4 x 15.2 cm, which provide a total area of ​​4.46 m². These sheets are resistant to mold, allergies, antistatic, igniphed, waterproof, non -slip, etc. Self -adhesive soil is the most suitable for smooth, dry, clean and flat surfaces to avoid breaks, air bubbles, praise or chipped. It is not recommended for humid or irregular soils, hot surfaces or as a subsoil. They comply with many European standards, such as fire tests (in 13501-1), solidity of color to light (ISO 105-B02), wear resistance (in 660-2), sliding resistance (DIN 51130), resistance to the resistance to Pelado (ISO 24345), residual aboller (ISO 24343-1), etc. Our soil slabs are easy to mount.

  • Color: Gray print
  • Material: PVC
  • Dimensions (each lama): 91.4 x 15.2 cm (long x width)
  • Total area: 4.46 m²
  • Thickness: 3 mm
  • It meets these European standards, as in 13501-1, ISO 105-B02, in 660-2, DIN 51130, ISO 24345, ISO 24343, etc.
  • It meets these European standards, as in 13501-1, ISO 105-B02, in 660-2, DIN 51130, ISO 24345, ISO 24343, etc.
  • Thermally and soundless isolated
  • Resistant and non -slip
  • Easy to install and maintain
  • Ideal for all types of solid and uniform surfaces
  • Requires assembly: Yes
  • Delivery contains:
  • 32 x soil lamps
Children must be supervised to make sure they do not play with the device. Keep children away from the assembly area. CAUTION: Read the instructions carefully before using and keep them for future consultations.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.