Skip to product information
  • Vetonek Máquina quitanieves 6,5 HP amarillo y negro

Quitanieves machine 6.5 yellow and black

1.088,40 €
1.088,40 € 1.224,97 €
You save 11% (136,57 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This powerful machine removes gasoline 6.5 HP has been designed to easily remove snow from car accesses, roads and other paved surfaces in residential or commercial properties. The air refrigerated cylinder works fluently and is designed to withstand low temperatures and to save fuel even in maximum power, so it can even be in charge of the densest snow layers. This Quitanieves machine is incredibly easy to use and maintain. You can start effortlessly and reliably with the setback, even in the coldest weather conditions, to work in dense snow. The wheels are operated by what is conducted effortlessly. The machine has a two -phase operation: during the first phase the snow and ice is collected and crushed through the resistant barrena blade; During the second phase they are expelled through the discharge duct by means of a driver, so the snow is dispersed uniformly. The launch distance is 11 m, which is very useful when removing heavy snow.

  • Color: yellow and black
  • Cleaning width: 61 cm
  • Input height: 51 cm
  • Motor type: Lancin G200F, 1 cylinder, air refrigerated, 4 times
  • Displacement: 196 cc
  • Maximum power: 4.1 kW/3600 rpm
  • Motor power: 6.5 hp
  • Speeds: 4 forward, 1 reverse
  • Start model: backward
  • Type of fuel: gasoline
  • Release Distance: 11 M
  • Gasoline deposit capacity: 3.6 L
  • Gasoline deposit capacity: 0.6 L
  • Transmission: endless screw gear
  • Manual control duct/deflector
  • Requires assembly: Yes
Keep children and other people away while using the device. Do not allow children to play with the device. It is not a toy. Use personal protective equipment before using this product. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.