Skip to product information
  • Vetonek Lijadora de yeso pladur roja 750 W

Red Pladur Plaster Lammer 750 W

147,54 €
147,54 € 166,05 €
You save 11% (18,51 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This plaster sander is a practical and versatile tool to give the walls a finish both during construction and during its reform. A much faster solution to sand roofs, interior and exterior walls, etc. This Pladur panel sander has a rotating head, which facilitates access to almost any corner and angle. The built -in brush head will prevent scratching. Its telescopic post allows you to sand those areas great and difficult to reach quickly and efficiently. You can also adjust the speed between 800-1750 RPM to meet your needs and improve the project in question. The sander has a lasting and light structure and its mango has an ergonomic design for a more comfortable grip. The sandwling for plaster panels includes a flexible dust vacuum hose that extends up to 4 meters to reliably collect the powder that is generated and keep the work area clean. It comes complete with 6 sandpaper discs (80, 100, 120, 150, 180, 240 shout) for thick and fine sanding. The delivery also includes 6 x clamps, 1 x screwdriver, 1 x Allen key, 2 x coal brooms and 1 x spring.

  • Power: 750 W
  • Tension: 230 v
  • Frequency: 50 Hz
  • Speed: 800-1750 RPM
  • Dimensions: (136-183) x 25 x 17 cm (length x width x high)
  • Sanding disc diameter: 22.5 cm
  • Hose length: 4 m
  • Cable length: 3 m
  • Delivery includes:
  • 6 x sandpaper discs (grain 80, 100, 120, 150, 180, 240)
  • 1 x screwdriver
  • 1 x Allen key
  • 6 x clamps
  • 2 x carbon brush
  • 1 x spring
Do not allow children to play with the device. It is not a toy. Only users with technical skills should use the tool. Use personal protective equipment before using this product. Keep children and people away away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.