Skip to product information
  • RedFire Chimenea Soledad arcilla amarilla /negra 86035

Redfire Chimney Soledad Yellow /Black Clay 86035

204,96 €
204,96 € 230,68 €
You save 11% (25,72 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Enjoy additional heat and a beautiful atmosphere on cold nights with Redfire's solitude fireplace. With the authentic appearance and touch of a product made using old techniques and its traditional ivy decoration, this rustic fireplace also has a decorative function during the day. The fireplace has a large front opening to insert firewood. Simply turn on the fire, feel close and enjoy while watching the flames flashing. The solitude fireplace is delivered with a resistant steel support. A clay fireplace protective lid is included to protect from the rain. If you want to even protect your purchase from the elements, the chimney is suitable for the rain cover redfire chimneys M, which is not included in delivery.

  • Color: yellow and black
  • Material: clay
  • Dimensions: 38 x 75 cm (high diameter x)
  • Produced using old techniques
  • Authentic design
  • Includes a robust steel support with black powder coating and a clay fireplace lid
Important: carefully remove the packaging before using the product, but keep the safety instructions. These instructions are part of the product. Take into account all security warnings included in these instructions. Read these instructions in its entirety and keep them for future consultations. These instructions should be saved together with the product. This product is only for domestic use and should not be used for commercial or contractual purposes.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.