Skip to product information
  • Vetonek Sillón de relax con taburete tela gris oscuro

Relax armchair with dark gray cloth stool

199,81 €
199,81 € 224,88 €
You save 11% (25,07 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Experience an optimal seat comfort after a busy day in this cozy relaxation of relaxes with restraint! First quality material: The fabric has a simple and clean appearance, and is breathable and lasting. Rubber solid wooden datwas: rubber wood is a beautiful natural material. Rubber wood has a dense grain and is resistant to blows and durable. The wooden legs give the chair and the rest of the room to be a natural and pleasant appearance while guaranteeing stability. Robust structure: with the support of a metal structure, this armchair is resistant and stable. : This stool is suitable for resting your feet when you lie on the couch, the reclining armchair or the decorative chair. It also offers you an additional seat in your room. Note: Each product comes with a mounting manual in the box to facilitate assembly.

  • Color: dark gray
  • Material: fabric (100% polyester), metal, solid rubber wood, plywood wood
  • Fill material: foam
  • Relax armchair:
  • Total dimensions: 70 x 77 x 94 cm (wide x high x)
  • Seat width: 50 cm
  • Seat depth: 49 cm
  • Seat height from the floor: 39 cm
  • Height of the headquarters from the ground: 51 cm
  • Footrest:
  • Total dimensions: 45 x 29.5 x 39 cm (wide x high x high)
  • Seat thickness: 7 cm
  • Max. Load capacity (per seat): 110 kg
  • Delivery includes:
  • 1 x relaxing armchair
  • 1 x rest

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.