Remove active mold

12,90 €
12,90 €
Tax included. Shipping calculated at checkout.
Container

Description

Nomold Quitamoho Active Row: Eliminates and protects against mold forever

What is it for?

Active Nomold Quitamoho is designed to quickly remove the mold from a wide variety of surfaces, including painted walls, natural and artificial stone, cement, mud, joints, ceramics and glass. This product sains the affected surfaces, restoring its original status and preventing future mold problems.

Advantages

  • Easy application: It comes in a practical spray container that facilitates its use in any situation.
  • Ideal viscosity: Formulated for an effective application on vertical surfaces, such as walls.
  • Fast action: Act in a few minutes, eliminating the mold efficiently.
  • Versatile: Effective even in the removal of mold in the joints, an area difficult to treat.

Ideal for

  • Porcelain sets
  • Ceramics
  • Mud
  • Painted walls
  • Cement and joints
  • Mud and face view
  • Extruded sets

Mode of employment

Nomold Quitamoho Active row comes ready to use, without diluting.

Application:

  1. Spray directly on the affected surface, maintaining the container vertical at a distance of 15-20 cm of the area to be treated.
  2. Leave act for about 15 minutes.
  3. Eliminate excess product with a humid cloth to avoid runoff.
  4. Repeat the operation if necessary and clarify with a wet sponge.
  5. To prevent mold reappearance, it is recommended to use Nomold Defense as posterior active protection.

Ventilation: Ventila the rooms during and after use (at least 4 hours of ventilation, or more if chlorine smell). Before painting, wait about 12 hours to ensure safe application.

Precautions:
Do not spray on plants, fabrics or metals. In case of accidental contact, wash immediately with water. Do not use polished stones as marble. For colored paintings, try first in a small area to check possible color alterations. Always use biocides safely and follow the instructions on the label. It is recommended to wear gloves and protective clothing, as well as a respiratory mask in areas with little ventilation.

Performance

With a liter of product they can be treated between 10 and 20 m², depending on surface absorption. The performance is indicative and may vary according to the conditions of use.

Formats

Available in 500 ml plastic containers with pulverizer, in boxes of 12 units. This format is designed to offer a comfortable and precise application, ensuring effective results in each use.


With Active Nomold Quitamoho, it eliminates the mold quickly and definitively, restoring and protecting your surfaces easily. Combine it with Nomold Defense for complete and lasting protection. Trust in a row to keep your home free of mold!

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.