RESIN SETTING OF ARIDS
Description
Monocomponent resin for the fixation or compaction of arid for paving in gardens, alcorques, roads, entries, splints, roundabouts and many more applications.
The aggregate is fixed and compacted, in addition an ideal porous pavement for the realization of Alcorques is generated since it allows the absorption of water.
Weather resistant.
It can be used with any type of always arid That is Washing and very dry.
Resin Employment Method
- No qualification is required for placement:
- The aggregate is mixed with the resin, in proportion of 7% of the weight of the aggregate. (1L for every 14 kg of aggregates)
- It applies to the surface, smoothing with plain and regle, avoiding excesses of resin that would remain in the background (drain if necessary).
- Under normal conditions, the reaction time is 4-6 h (surface drying; 12-20 h for total curing), after 24 h can step on the pavement.
Clarifications
- To cover 1 m² of surface with a thickness of 4 cm 64 kg will be necessary. of aggregate and 4.5 l of resin.
- Maintain 2-3 mm dilation joint within the frame.
- Not suitable for vehicle traffic, nor for areas with a high pedestrian traffic.
- Use granulometry arid between 3-12 mm.
WARNINGS
- For its correct application it is necessary for the aggregate to be washed and very dry.
- Do not apply to temperatures below 7ºC (otherwise you can cortar, although we would have union between stones).
- Despite the strong union that the product provides, the movements due to the growth of roots or strong dilations, cannot be absorbed, by the system, as well as the possible incorrect application, etc.
"
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.