Skip to product information
  • Vetonek Sierra de cinta con ancho de corte 200 mm

Ribbon saw with 200 mm cutting width

222,88 €
222,88 € 250,85 €
You save 11% (27,97 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our tape saw with a long and sharp blade is the ideal solution to make a quick and precise cut of hard and soft wood. This tape saw practice has a maximum cutting height of up to 80 mm and a width of up to 200 mm. It has a cutting speed of 900 m/min and a incline table, adjustable from 0 ° to 45 ° for large cutting flexibility. The construction of robust steel adds stability and durability to the tape mountain range.

  • Color: black and silver
  • Material: Steel
  • Table dimensions: 290 x 290 mm (length x wide)
  • Leaf length: 1400 mm
  • Sierra blade width: 6.5 mm
  • Sierra leaf thickness: 0.35 mm
  • Maximum cutting height: 80 mm
  • Maximum cutting width: 200 mm
  • Sierra wheel diameter: 210 mm
  • Food: 230 V-240V ~ 50 Hz
  • Power: (S1) 350 W / (S2 20 min) 450 W
  • Cut speed: 900 m/min
  • 0 ° to 45 ° inclinable table
Do not allow children to play with the device. It is not a toy. Only users with technical skills should use the tool. Use personal protective equipment before using this product. Keep children and people away away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.