Skip to product information
  • RIDDER Estante de ducha 30,5x12,4x14 cm cromado 12010200

RIDDER Estante de ducha 30,5x12,4x14 cm cromado 12010200

63,04 €
63,04 € 70,95 €
You save 11% (7,91 €)
Tax included. Shipping calculated at checkout.

Description

¿Está buscando un estante de pared para los artículos de baño, pero no quiere estropear las paredes con agujeros o residuos de adhesivo? ¡Entonces este estante de ducha RIDDER con ventosas es la solución ideal! El sistema de succión único es fácil de fijar y aflojar nuevamente con un giro de 90°. Las ventosas tienen una potencia de sujeción alta en todos los azulejos. Al usar las almohadillas adhesivas suministradas, se puede utilizar el papel tapiz uniforme y diferentes tipos de enlucido como base. Las ventosas están hechas de plástico suave y fácil de limpiar y no dejan marcas al quitarlas. Las ventosas están hechas de plástico duro de alta calidad. Gracias a la lengüeta de arrastre integrada en las ventosas, quitarlas es un juego de niños. Las almohadillas adhesivas suministradas también son muy prácticas en caso de que la loseta sea demasiado rugosa o tenga grietas finas (invisibles). Para una higiene perfecta, recomendamos quitar la estantería de ducha cada 4 semanas, limpiar a fondo la superficie, enjuagar las ventosas con agua limpia y secar todo antes de volver a instalarla.

  • Color: Cromado
  • Material: Acero inoxidable
  • Dimensiones: 30,5 x 12,4 x 14 cm (longitud x anchura x altura)
  • Diámetro ventosa: 6 cm
  • Con separador de pared cubierto de plástico suave
  • Se fija con ventosas, no se necesita perforación o pegamento

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.