Skip to product information
  • RIDDER Alfombrilla para ducha antideslizante Action gris

RIDDER PATIPLAR for non -slip shower Action Gray

21,39 €
21,39 € 24,08 €
You save 11% (2,69 €)
Tax included. Shipping calculated at checkout.

Description

Ridder's non -slip action for a better grip and support while enjoying a bath or shower. Slip in the shower or bathtub will be a thing of the past. This non -slip shower mat combines great quality with a good sense of safety. The bathtub carpet remains in place thanks to the suction cups and can be easily removed to clean. This shower mat is made 100% synthetic rubber and does not contain harmful substances. It is pleasant for the skin and comfortable to use, without risk of contact allergies. It also dries quickly due to integrated holes (do not use the holes to hang the mat). Note: Do not expose the shower mat to direct sunlight or to ultraviolet light and not dry it over a hot radiator. To dry it, you can leave the mat on the bathroom wall or place it on the wall or shower tiles with suction cups.

  • Gray
  • Material: Tpe rubber
  • Dimensions: 53 x 53 x 0.5 cm (length x width x thickness)
  • It remains in place thanks to the suction cups
  • It dries quickly thanks to integrated holes
  • Delicate with the skin
  • Without PVC
  • Non -slip
  • Rinse with clean water after using
  • Not suitable for the washing machine
  • Manufactured in Germany

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.