Skip to product information
  • RIDDER Cabina de ducha Ombrella 200 cm azul 58203

Ridder shower cabin ombrella 200 cm blue 58203

73,50 €
73,50 € 82,73 €
You save 11% (9,23 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Ridder ombrel shower cabin is a solution of bath problems if you cannot install a regular shower cabin in your bathroom due to a limited or inappropriate space or windows placed inconveniently. The wall and post support of this shower cabin are made of resistant plastic, including ABS, PA and PP. Combined with stainless steel bars, the shower cabin is very resistant and lasting. The bathing curtain is made of Peva, which is completely waterproof and can be washed by hand with cleaning products. Your assembly is easy. It is easy to mount the shower cabin on the wall to use in the bathtub and close at both ends. You can also fold to save space. Assembly accessories are available. If clips and tapas are lost, additional 3 pieces are included.

  • Color: blue, chrome and white
  • Material: Plastic + stainless steel
  • Shower curtain material: fabric
  • Height (curtain): 170 cm
  • Closes at both ends
  • Hand washable
  • Easy assembly
  • Assembly accessories (screws and wall tacos) are included
  • 3 additional clips and tapas are included
  • Material: Peva: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.