Schütte shower shelf only white

26,85 €
26,85 € 30,22 €
You save 11% (3,37 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

If you are looking for a shower shelf for your bathing items, this Schütte shower shelf, only model, is perfect for you! When using adhesive pads, different surface types and even wallpaper can be used as a base. The adhesive pads provided are also very practical if the tile is too rough or has fine cracks (invisible). In addition, the shelf can be mounted using screws. Note: The screws are included in the delivery. You can choose the most appropriate way to mount the shelf you want. The shower shelf is easy to clean and maintain, so it is a perfect contribution to the bathroom.

  • Color: White
  • Material: Melamine
  • Dimensions: 35 x 12.5 x 5 cm (length x width x high)
  • Easy to take care of
  • Easy assembly
  • Possibility of mounting with adhesives or screws
  • Includes adhesive set, screws and glue to mount it
Security tips. In case of adhesive contact with the skin, rinse with running water and soap. . In case of contact with the eyes, rinse with plenty of water and consult a doctor. . In case of ingestion, go to the doctor immediately. Elimination to protect it against damage during transport, the shelf is delivered in a solid packaging. The packaging is made of recyclable materials. Get rid of them respectful of the environment. Do not discard the product at the end of its useful life with normal domestic garbage, but request information from local authorities about the possibilities of environmentally respectful elimination. Technical data Maximum load capacity: up to 2.5 kg assembly information An incorrect installation can cause accidents; Objects could turn or fall. Be sure to wear adequate screws/accessories to the walls of the wall or ceiling and with sufficient load capacity. If necessary, request information in a specialized trade. Glue application: Clean all surfaces with adequate cleaning products. The glue cannot be used on wallpaper, plaster plates, polyethylene (PE), polypropylene (PP) and polytetrafluoroethylene (PTFE, Teflon). Adhesive processing temperature from + 5 ° C to + 40 ° C. Attention, water damage! Before drilling, make sure there are no pipes in the place of drilling. Before placing it on the wall, find out about the appropriate mounting material for its wall. For wall assembly, we have included suitable assembly material for normal solid masonry. Attention, electric shock! Before drilling, make sure there are no electrical cables in the drilling place. Care instructions colored surfaces should not be cleaned under any circumstances with abrasive, corrosive or containing alcohol products. Clean your shelf only with clean water and a soft or leather cloth. Disassembly · Glue application: Use a spatula or an unbreakable blade to release the first shelf at the height of silicone plugs and then in the rest of the area stuck. At the same time, prevent the shelf falling with the other hand. Also eliminate adhesive remains with a spatula or similar. · Union by screws: loosen the fixing screws while simultaneously holding the shelf with the other hand to prevent it from falling. Illustrations should be considered as figurative representations, product deviations may occur. Subject to technical modifications.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.