Skip to product information
  • Vetonek Gaita escocesa de las Highland Royal Steward negro
  • Gaita escocesa de las Highland Royal Steward negro vidaXL
  • Gaita escocesa de las Highland Royal Steward negro vidaXL
  • Gaita escocesa de las Highland Royal Steward negro vidaXL
  • Gaita escocesa de las Highland Royal Steward negro vidaXL
  • Gaita escocesa de las Highland Royal Steward negro vidaXL

Scottish bagp of the highland Royal Steward Black

161,95 €
161,95 € 182,27 €
You save 11% (20,32 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This bright -looking bagplay is suitable for beginners or bagpipe students and will be very fun to play. The bagpipe is a wind instrument with a great story. When blowing air in the bag, pressure accumulates and a constant harmonizing note will be produced through drones. The bag is made of high quality synthetic material and covered with a black tartan by Royal Steward. It is made to be 100% hermetic, thus guaranteeing a high quality sound. The pipes are made of the best wood with a soft Palisandro finish. The reeds have a large volume and give a pleasant tone when touching. The bagpipe game includes a synthetic bag, strings, a tube singer, a plastic singer cane, 2 tenor rods, 2 cantonero reeds and a bag cover.

  • Fabric: Tartan Black and Green Clock
  • Pipas: solid wood with Palisandro finish
  • Characteristics:
  • 100% hermetic synthetic bag.
  • Scottish fabric bagpipe cover and matching cord
  • MOUNDS HALF IMITATION IMPERIZE AND HALF SILVER.
  • Includes 1 set of cane and plastic cane.
  • Age recommendation: Apt for children from 36 months

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.