Skip to product information
  • Vetonek Set muebles de baño 2 piezas madera contrachapada gris hormigón

Set bath furniture 2 pieces wood gray concrete

100,02 €
100,02 € 112,57 €
You save 11% (12,55 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This set of bathroom furniture is an excellent contribution to the bathroom and gives it an orderly and striking appearance! Durable material: engineering wood has an exceptional quality, with a smooth surface and also with strength, stability and humidity resistance. Bathrooms, such as soaps, shampoo, toothpaste, etc. In this way, you can release space on the floor and have your orderly and clean atmosphere. Clear image: The glass face of the mirror provides a fine reflection and without distortions, so it serves to make up, shave or look at if you are well dressed before out Useful information: The sink is not included in the delivery. The screws and the tacos for the interior of the wall are not included. We recommend finding and using adequate screws and tacos specifically for the walls. If you are not sure, you can consult with a professional. Read and continue every step of the instructions.

  • Cupboard:
  • Color: concrete gray
  • Material: Engineering Wood
  • Dimensions of the sink furniture: 90 x 38.5 x 46 cm (wide x high x high)
  • Dimensions of the bathroom closet: 30 x 30 x 80 cm (wide x high x high)
  • Mirror:
  • Material: engineering wood, glass
  • Dimensions: 90 x 37 cm (length x wide)
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x sink cabinet
  • 1 x bathroom closet
  • 1 x mirror

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.