Skip to product information
  • Vetonek Set de bistró jardín 3 pzas ratán sintético madera acacia negro

Garden Bistró Set 3 pcs Synthetic Black Black Wood

443,09 €
443,09 € 498,69 €
You save 11% (55,60 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This elegant garden dining set is destined to be the garden or patio care center. It is a great option to eat or relax outdoors! The steel structure with powder coating makes the table and strong and resistant chairs. Thanks to light construction, all elements are easy to move. The weather -resistant synthetic rattan and acacia wood with finishing an oil finish are easy to clean with a damp cloth. The armchairs are designed with support and curved plates for greater comfort. Cushions are included for additional support and the zipper can be removed to facilitate cleaning. When the table is not in use, it can be folded to be stored easily.

  • Color: black
  • Material: Synthetic rattan, steel, acacia wood with oil finish, tissue (100% polyester)
  • Folding table dimensions: 60 x 75 cm (high diameter)
  • Chair dimensions: 58 x 63 x 108 cm (wide x high x high)
  • Seat size: 44/49.5 x 54 cm (deep x width)
  • Height of the headquarters from the ground: 61 cm
  • Backup dimensions: 43/51 x 95 cm (high x width)
  • Seat cushion thickness: 4 cm
  • Reclining backs
  • Max. Load capacity (per seat): 110 kg
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x folding table
  • 2 x armchairs

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.