Skip to product information
  • Vetonek Set de comedor jardín 5 pzas y cojines ratán sintético marrón

Garden 5 pcs and cushion dining set and brown synthetic cushions

303,57 €
303,57 € 341,66 €
You save 11% (38,09 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our synthetic ratan garden dining room set, with an elegant design, will be a great choice to eat outdoors or relax in the garden or patio. The set of garden furniture has a steel structure with powder coating, so it is very stable and durable. Thanks to the water resistant pe rattan, the dining game is easy to clean, resistant and adequate to use daily. The glass surface is also easy to clean with a damp cloth. Seat and backup cushions are filled with foam and are very comfortable. Polyester covers barely need care and can be easily removed to wash them. The garden dining game is completely easy to assemble. The delivery includes 1 table, 4 chairs and 8 cushions. Note: It is recommended to cover the set in case of rain, snow and frost.

  • Color: Brown
  • Material: Ratán Pe + Glass board + steel structure with powder coating
  • Cushion material: 100% polyester case with foam filling
  • Table dimensions: 109 x 109 x 74 cm (length x width x high)
  • Chair dimensions: 52 x 56 x 85 cm (wide x high x high)
  • Seat depth: 41 cm
  • Seat width: 46.5 cm
  • Seat height from the ground: 44 cm
  • Height of the headquarters from the ground: 67 cm
  • Cushion thickness: 5 cm
  • Removable cushion case
  • Delivery includes:
  • 1 x table
  • 4 x chair
  • 8 x cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.