Skip to product information
  • Vetonek Set muebles de jardín y cojines 8 piezas ratán sintético negro

Set muebles de jardín y cojines 8 piezas ratán sintético negro

802,01 €
802,01 € 802,01 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este conjunto de sofás de ratán combina estilo y funcionalidad, y se convertirá en la principal atracción de tu jardín o patio. El conjunto de muebles completo ha sido diseñado para uso en exteriores durante todo el año. Gracias al ratán PE, que es resistente a la intemperie y al agua, el conjunto de salón es fácil de limpiar, resistente y adecuado para el uso diario. El conjunto de asientos dispone de una estructura de acero con recubrimiento de polvo robusta, que hace que sea muy duradero. También es ligero y modular, lo que hace que sea totalmente flexible y fácil de mover para adaptarse a cualquier entorno. Los gruesos cojines extraíbles son muy cómodos. La entrega incluye 2 sofás esquineros, 3 sofás centrales, 2 reposapiés, 1 mesa de centro, 5 almohadas, 7 cojines de asiento y 7 almohadones de respaldo. Nota: Te recomendamos cubrir el set si llueve, nieva o hiela.

  • Color del ratán: Negro
  • Color cojín: Negro
  • Material: Ratán PE + estructura de acero con revestimiento en polvo
  • Material del cojín: 100% poliéster
  • Material de la mesa: Vidrio templado
  • Dimensiones del sofá de la esquina: 70 x 70 x 52,5 cm (ancho x profundo x alto)
  • Dimensiones del sofá de centro: 70 x 70 x 52,5 cm (ancho x profundo x alto)
  • Dimensiones del reposapiés semicircular: 70 x 35 x 26 cm (largo x ancho x alto)
  • Dimensiones de la mesa de centro: 74 x 74 x 26 cm (largo x ancho x alto)
  • Dimensiones de las almohadas: 40 x 40 x 6 cm (largo x ancho x grosor)
  • La entrega incluye:
  • 2 x Sofás de esquina
  • 3 x Sofás de centro
  • 2 x Taburetes
  • 1 x Mesa de centro
  • 5 x Almohadas
  • 7 x Cojines de asiento
  • 7 x Cojines de respaldo

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.