Skip to product information
  • Vetonek Set sofás de jardín 5 piezas y cojines ratán sintético marrón

5 pieces garden sofas set and brown synthetic rattan cushions

958,74 €
958,74 € 1.079,04 €
You save 11% (120,30 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This set of synthetic rattan sofas, composed of 2 three -seater sofas, 2 armchairs, 1 table and 16 cushions, will turn a corner of the garden or patio into an elegant living room. Thanks to the water -resistant pe racán, the patio sofas game is easy to clean, resistant and adequate to use daily. The steel structures with powder coating make the set resistant and stable, but, as the construction is light, all parts can easily move to fit into any environment. This set is also delivered with backup cushions and multi -and -comforted seat cushions to offer the definitive comfort. Polyester covers that barely need maintenance can also be removed and washed. This set is easy to mount. Note: We recommend covering the product in rain, snow and frost conditions to be more durable.

  • Color: Brown and White Cream
  • MATERIAL: PE + glass surface + steel structure with powder coating
  • Cushion case material: 100% polyester
  • Cushion thickness: 6 cm
  • Table dimensions: 120 x 70 x 66 cm (length x width x high)
  • 3 -seat sofa:
  • Dimensions: 160 x 62 x 87 cm (wide x high x)
  • Seat width: 150 cm
  • Seat depth: 50 cm
  • Seat height from the ground without cushion: 36.5 cm
  • Height of the floor from the ground: 65 cm
  • Armchair:
  • Dimensions: 61 x 70 x 87 cm (wide x high x high)
  • Seat width: 50 cm
  • Seat depth: 50 cm
  • Seat height from the ground without cushion: 36.5 cm
  • Height of the floor from the ground: 65 cm
  • Washable cushion covers
  • Delivery includes:
  • 2 x 3 -seat sofas
  • 2 x armchairs
  • 1 x table
  • 8 x support cushions
  • 8 x seat cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.