Skip to product information
  • Vetonek Estirador de zapatos con calzador EU 38-39 madera maciza cedro

Shoes stretch with Eu 38-39 Sounded wooden wood

38,94 €
38,94 € 43,83 €
You save 11% (4,89 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These shoe stretkers are specifically designed to lengthen and widen your shoes. With your help, you will transform your shoes into a comfortable footwear that looks at you well. Massy Haya Wood: The shoe expander is made of natural beech wood, which absorbs moisture, gives off a pleasant aroma and helps maintain the shape of the shoes, especially those of leather, to prolong its useful life. Ways: The wooden shoes stretch is adjustable in length and width to adapt perfectly to your shoes. Thanks to the strong docks in the length and the forefoot area, the shoe extensor offers you the perfect retention of your shoes. : The shoes scatter can be used for a variety of flat shoes, including leather shoes, canvas, sports, casual and nautical.

  • Material: solid cedar wood (without treating)
  • Size (for women): EU 38-39 (US 7.5-8.5; Au 8-9; UK 5-6)
  • Size (for men): EU 38-39 (US 5,5-6.5; Au 5-6; UK 5-6)
  • Dimmer size: 15.5 x 4 cm (length x wide)
  • Just suitable for flat shoes, not for heel shoes
  • Delivery contains:
  • 1 x pair of shoe stretches
  • 1 x shoe

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.