SISAL CARPET FOR RASCADOR 80x300 CM

138,02 €
138,02 €
Tax included. Shipping calculated at checkout.
Size
Color

Description

For your cat to be entertaining and you can sharpen the nails, this sisal carpet is the best choice! Durable material: This carpet to scratch is 100% sisal, so it is lasting and versatile. In addition, Sisal's carpet has a very positive effect on the inner climate, since it absorbs the moisture of the air and releases it again when it is needed. Multiple uses: this sisal mat can not only be used as a dart so that your cat The nails, play and sleep, but also can be used as an Unda for trees, tables and scratch posts and for other cat furniture, so that your cat can enjoy scratching! Non -slip function: the non -slip back maintains the carpet Natural Sisal in its place and reduces the probability of slippers, so the sisal carpet to scratch is suitable for various surfaces. . Therefore, just using the vacuum cleaner from time to time you can maintain the original beauty of the natural Sisal carpet. Note: The carpet is packed to facilitate transport. Please give the product some time to become perfectly straight and flat. This carpet should not be placed in the sun or expose yourself to excessive humidity. If you cannot do the cleaning, enter specialized professionals. bleach, dry or iron.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.