Skip to product information
  • Vetonek Puerta corredera con herrajes madera maciza de pino 70x210 cm

Sliding door with pinewater wooden wooden hardware 70x210 cm

195,36 €
195,36 € 219,87 €
You save 11% (24,51 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Sliding Wooden Pine Wooden door is designed to beautify the entrance area of ​​the house and also to guarantee greater home security. Solid pine wood: The inner door is solid pine wood. The solid pine wood is a beautiful natural material. Pine wood has straight veins, and knots give the material its distinctive rustic appearance. Resistant sliding stretch: steel is a very hard and resistant material, which offers solidity and stability. The steel powder coating creates a protective layer against wear. Made of steel with dust coating, the sliding rails are robust, durable and resistant. Soft and silent for the internal bearings, the inner sliding door will slide smoothly and silently. Door stops are also included to avoid the derailment of the rollers, while the rubber joints will cushion the roller's blow and reduce the noise. Diseño that saves space: this sliding wooden door saves space and seems wider. It is the first option for a modern home design, simple and with a beautiful atmosphere. It is ideal to use in the bedroom, the kitchen, the barn, the garage, etc.

  • Sliding door:
  • Material: solid pine wood (without treating)
  • Dimensions: 70 x 3.6 x 210 cm (wide x high x high)
  • Range: Narvik
  • HIERRAJES KIT:
  • Color: black
  • Material: Powder coating steel
  • Total length of the Slider Guide: 213.5 cm
  • Maximum weight capacity: 100 kg
  • Proper door dimensions: 107 cm wide, 35-45 mm thick
  • With 2 holes in every 2 sides
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x door
  • 2 x sliding lanes
  • 2 x door stops
  • 2 x rollers
  • 5 x fixing clamps
  • 1 x soil guide
  • Other necessary devices

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.