Skip to product information
  • Vetonek Sofá cama de madera maciza de pino gris 90x190 cm

Sofá cama de madera maciza de pino gris 90x190 cm

100,59 €
100,59 € 113,21 €
You save 11% (12,62 €)
Tax included. Shipping calculated at checkout.

Description

Esta versátil sofá cama puede utilizarse no solo como cama en el dormitorio, sino que también encaja perfectamente como sofá en el salón. Se adaptará perfectamente a tus diferentes necesidades, proporcionándote mucho espacio para dormir o descansar. Madera de pino maciza: La madera de pino maciza es un bonito material natural. La madera de pino tiene vetas rectas, y los nudos dan al material su distintivo aspecto rústico.Estructura de cama robusta: La estructura de madera garantiza su solidez y estabilidad. Los listones proporcionan una buena distribución del peso, lo que garantiza que el colchón se mantenga en su sitio con cada giro y vuelta del cuerpo mientras duermes.Espacio de almacenamiento adicional: Aprovecha el espacio bajo el sofá cama para guardar diversos objetos. Perfecto para guardar cajas para organizar tu ropa, juguetes o colchas. Nota:La entrega incluye solo una estructura de cama. El colchón no está incluido. Puedes echar un vistazo en nuestra tienda para buscar colchones a juego.Esta estructura de cama es adecuada para un colchón de 90 x 190 cm (individual).

  • Color: Gris
  • Material: Madera de pino maciza
  • Dimensiones totales: 195,5 x 96 x 30 cm (largo x ancho x alto)
  • Tamaño de colchón adecuado: 90 x 190 cm (ancho x largo) individual (el colchón no está incluido)
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.