Skip to product information
  • Vetonek Sofá cama de terciopelo amarillo

Sofá cama de terciopelo amarillo

272,09 €
272,09 € 272,09 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este sofá cama es perfecto para que tus invitados duerman por la noche y para sentarte cómodamente durante el día. Terciopelo de sofá: El terciopelo es una tela suave y lujosa, reconocida por su denso pelo de fibras cortadas de forma uniforme que tienen una suave pelusa. El tejido de terciopelo posee un tacto suave y característico, además de ser agradable al tacto. Respaldo ajustable: Puedes empujar los dos respaldos separados del sofá cama parcial o totalmente hacia abajo para crear un lugar ideal para una siesta o una cama doble. Cómodo asiento: El sofá cama es muy cómodo con asientos y respaldos con acolchado grueso.Prácticos cojines: Estos cojines no solo mejoran la decoración, sino que también añaden un plus de comodidad cuando estás sentado o acostado. Estructura robusta y estable: La estructura de madera contrachapada del sofá cama garantiza su solidez y estabilidad. Información útil:Para facilitar al máximo el montaje, cada producto se entrega con un manual.

  • Color: Amarillo
  • Material: Terciopelo (100 % poliéster), madera contrachapada
  • Material de relleno: Espuma
  • Dimensiones totales (cerrado): 200 x 89 x 70 cm (ancho x profundo x alto)
  • Dimensiones totales (abierto): 200 x 100 x 33 cm (ancho x profundo x alto)
  • Ancho del asiento: 200 cm
  • Profundidad del asiento: 55 cm
  • Altura del asiento desde el suelo: 33 cm
  • Altura de los pies: 15 cm
  • Dimensiones del cojín (cada uno): 40 x 40 cm (ancho x profundo)
  • Máx. capacidad de carga (por asiento): 110 kg
  • La entrega incluye:
  • 1 x Sofa cama
  • 2 x Cojines

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.