Skip to product information
  • Vetonek Sofá esquina jardín con cojines 2 piezas madera maciza teca

Sofa corner garden with cushions 2 pieces solid wood teak

523,62 €
523,62 € 589,32 €
You save 11% (65,70 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This wooden corner sofa, which stands out for its slag design and its soft cushions, will be a great complement to your garden, terrace or patio, to chat with family and friends or simply to enjoy time. Durable material: Teak solid wood is a beautiful natural material. It has been cured, baked and then finely sanded to give it a very soft look. Teak wood is known for its exceptional strength and weather resistance. Comfortable numbers: additional cushions are included for your comfort. Practical design: the sofa is easy to move, which facilitates the creation of different distributions that fit your needs. You can organize your own living room if you are looking for other modular sofas with the same design and style in our store. Note: Each product comes with a mounting manual in the box to facilitate assembly. To prolong the life of your outdoor furniture, we recommend you that protect them with a waterproof case.

  • Cushion color: dark gray
  • Material: solid teak wood with water finish, cloth (100% polyester)
  • Dimensions: 69.5 x 69.5 x 60 cm (wide x high x high)
  • Sofa seat cushion thickness: 5 cm
  • Rear cushion thickness: 15 cm
  • Delivery includes:
  • 2 x corner sofas
  • 2 x seat cushions
  • 4 x rear cushion
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.