Skip to product information
  • Vetonek Sofá de jardín con reposabrazos y cojín madera maciza de pino

Garden sofa with plates and cushion wood solid pine

98,02 €
98,02 € 110,32 €
You save 11% (12,30 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This wooden sofa will be a good contribution to the garden, the terrace or the patio, to chat with family and friends or simply enjoy the good weather. Solid pine wood: garden seats are made of solid pine wood for greater robustness and stability. The solid pine wood is a beautiful natural material. Pine wood has straight veins, and knots give the material their distinctive rustic appearance. Comfortable rule: backup and cushions make the garden sofa more comfortable. As auxiliary table: This outdoor furniture has an auxiliary table folding with a gas spring in the armrests, which provides a convenient place to maintain your essential elements at the reach of the hand. dry seat and preventing it from rotting unnecessarily. Modular design: the sectional sofa is flexible and easy to move. You can combine it with other modular segments available in the drop -down menu to create your own personal garden games configurations! Various uses: The garden chair is perfect for any porch, patio, backyard, grass, garden, etc. Useful information: To make sure that your outdoor furniture stays beautiful, we recommend protecting them with an impermeable case.

  • Material: solid pine wood (without treating)
  • Dimensions: 62 x 62 x 70.5 cm (wide x high x)
  • Seat height from the floor: 32 cm
  • Height of the headquarters from the ground: 52 cm
  • Auxiliary table dimensions: 58 x 25 cm (length x wide)
  • Cushion color: anthracite gray
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x garden sofa
  • 1 x seat cushion
  • 1 x support cushion
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.