Skip to product information
  • Vetonek Sofá de palets para jardín madera con cojines beige

Sofá de palets para jardín madera con cojines beige

187,35 €
187,35 € 187,35 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Nuestro sofá de palets de jardín será una opción ideal para que te relajes y disfrutes del buen tiempo, duermas una siesta o charles con tu familia o amigos. Con un diseño atemporal de palets, el sillón de madera agregará un toque de encanto rústico a tu patio, jardín o sala de estar. Hecho de madera de pino de calidad, el asiento del sofá de exterior es duradero y resistente a la intemperie. Este sofá de jardín tiene una construcción sólida y requiere poco mantenimiento. Entregado con cojines suaves y gruesos acolchados, nuestro sofá proporcionará la máxima comodidad. Los muebles de jardín son fáciles de montar. Ten en cuenta que la madera es un producto natural y puede presentar imperfecciones.

  • Color: Beige
  • Material: Madera de pino, tela (100% poliéster)
  • Dimensiones totales: 80 x 67,5 x 60,8 cm (ancho x profundo x alto)
  • Ancho del asiento: 60,8 cm
  • Profundidad del asiento: 61,5 cm
  • Altura del asiento: 30,5 cm
  • Grosor del cojín del asiento: 10 cm
  • Grosor del cojín de respaldo: 10 cm
  • Adecuado tanto para el interior como el exterior
  • Requiere montaje: Sí
  • La entrega contiene:
  • 1 x Sillón de palets
  • 1 x Cojín de asiento
  • 1 x Cojin de respaldo

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.