Skip to product information
  • Vetonek Sombrilla de jardín con luces LED palo aluminio burdeos 270 cm

Garden umbrella with bordeer aluminum led lights 270 cm

94,26 €
94,26 € 106,08 €
You save 11% (11,82 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This garden umbrella is perfect to create shadow and protect from the harmful UV rays of the sun. Made of polyester with UV protection and anti-decoration, the umbrella cover provides optimal protection against the sun and is easy to clean. The strong aluminum post, along with 6 cvarillas of robust steel, makes the umbrella very stable and lasting. The garden umbrella can be easily opened and closed thanks to the crank mechanism. The 18 integrated LED lights, which work with 1 solar panel, will create a cozy and romantic atmosphere at night. The article is easy to assemble. Keep in mind that we recommend treating the umbrella fabric with a waterproofing spray if it is subjected to heavy rains.

  • Color: Bordeaux red
  • Materjal: Kangas (100% Polüester), aluminium
  • Total dimensions: 270 x 236 cm (high diameter x)
  • Post diameter: 38 mm
  • With crank and ventilation mechanism
  • Includes 24 LED bulbs and 1 solar panel
  • Solar panel power: 1.6 W
  • Includes 6 rods
  • Requires assembly: Yes
The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.