Skip to product information
  • Vetonek Somier de láminas sin colchón con cabecera ajustable 70x200 cm

Plate somier without mattress with adjustable headlet 70x200 cm

83,31 €
83,31 € 93,77 €
You save 11% (10,46 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This comfortable wood sheet somier is a good choice to sleep well! With a solid beech wood structure and birch slats, the somier is robust and durable. The two ends of the sheets are subject to SBS rubber caps to improve the stability of the entire structure. Enjoy and relax in this Somier. Thanks to the adjustable head, the Somier can adapt to your real needs. Keep in mind that delivery includes only one somier of sheets; The mattress and the bed structure are not included. Note: Assembly is required due to shipping restrictions that limit the size of the package to a maximum of 120 cm.

  • Rubber lid color: anthracite gray
  • Material: Sound wood, plywood wood, birch
  • Dimensions: 195 x 70 x 5.5 cm (length x width x high)
  • Adequate mattress dimensions: 70 x 200 cm (width x long) (the mattress is not included)
  • 13 slats
  • Includes SBS rubber caps to hold the slats
  • The header area is adjustable
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.