Skip to product information
  • Vetonek Mesa de centro madera maciza acacia acabado miel 110x55x35 cm

Sounding Center Table Acacia Finishing Honey 110x55x35 cm

312,43 €
312,43 € 351,64 €
You save 11% (39,21 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This retro -style wood center table will be a timeless contribution for the decoration of your living room! The table is made of solid acacia wood with a honey finish and is very lasting and stable. Acacia wood is a hard wood with beautiful veins that will last for many years. Similar to acacia wood, known as pink or pallisandro stick, is also famous for its rich veins. The upper part has only one door that can be lifted to easily keep the items. The wood structure gives the center table a vintage appearance. Each step of the process is carried out with maximum care, whether polishing, painting or lacquered. The assembly is easy. Important note: The colors and veins of the wood vary from one piece to another, so that each piece is unique and slightly different from the others. Delivery is random, which guarantees the exclusivity and individuality of the product.

  • Material: solid acacia wood with honey finish + lower part of MDF
  • Dimensions: 110 x 55 x 35 cm (length x width x high)
  • Surface with a single lid that can be lifted
  • With a large storage space.
  • Polished, painted and lacquered
  • Easy assembly

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.