Skip to product information
  • Vetonek Set de cortapelos para caballos 350 W

Speech Set for Horses 350 W

122,64 €
122,64 € 138,03 €
You save 11% (15,39 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Now that the warmer stations approach, it's time to cut your horse's fur! This complete game of horses will help you perform this task efficiently. Combining a thin housing with a very efficient engine, this 350 w machine is strong enough to cut thick hair of horses, but compact enough for you to keep it without much effort. It has a high speed of 2400 rpm, allowing an ultra soft and comfortable haircut experience for you as well as for your horse. Noise and vibration during use are minimal, which adds to handling comfort. With the lubricating oil included and the long cable, you can face any demanding cut work. The machin and accessories come in a comfortable transport case, so it can conveniently carry all the necessary tools to prepare your horse anywhere.

  • Color: black and red
  • Case dimensions: 43 x 18 x 10 cm (length x width x high)
  • Machine dimensions: 30.5 x 6.5 x 6 cm (length x width x high)
  • Cable length: 5 m
  • Food: 350 w
  • Blade speed: 2400 rpm
  • Voltage/Frequency: 220-240 v/50 Hz
  • Adequate ambient temperature: 0-40 ° C
  • It is delivered in a practical transportation briefcase
  • Delivery includes:
  • 1 x Cuts for horse
  • 2 x carbon brush
  • 1 x screwdriver
  • 1 x lubricating oil
  • 1 x Cleaning brush
This product can only be used by trained personnel. Children must be supervised to make sure they do not play with the device. The device is designed only for cutting purposes. Warning: cutting blades can be heated after prolonged use. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.